Test Assembly to drill mounting holes for attachment. Entire horse is bolted together using 1/4-20 bolts and nuts.
Legs are through bolted using 10-32 threaded rods and nuts.
Dry assembly to
Showing Bolts for stringer and bolt for leg...
Cutting out Ears, both ears were cut from one glove. I removed wrist stitching for the second one (see below).
Staining Legs and Body
Stained Rockers and mounted floor boards...
two coats of polyurethane later and Final Assembly... Notice 10-32 Threaded rods through bolted to hold legs on.
This was quite and undertaking and was almost not finished,as I was in the Hospital and recuperated for 2-3 weeks after.
But I did manage to finish it and deliver by afternoon Dec 24, 2009.